When it comes to toilets not flushing, most people immediately know there is an issue. We at The Original $49.95 Plumber would like to share the most common issues and what you can do to fix it, though there are quite a few reasons that can be causing it.
Warped Toilet Flapper
As it allows water to run from the tank into the bowl, the toilet’s flapper opens and closes whenever you flush. When you depress your toilet’s handle, you are actually lifting the flapper. Over time the flapper can bend, or warp because the flapper itself is in contact with moving water all the time. The is rubber, cup-like fixture located at the bottom of the toilet tank is a flapper, and it should be examined by opening the back tank of your toilet. Covered by the flapper, is the hole that leads from the tank to the bowl. You should be easily telling if the flapper is too warped to properly cover the flush tube hole. if it looks warped, broken, or damaged in any way, you will need to replace the flapper. At any hardware, home improvement, or some department stores, flappers can be discovered. Most plumbers can help get the right flapper and get it installed for you if you need to.
Too Much Slack in Toilet Chain
Connected to the chain is the flapper to the toilet handle. When you depress the handle, the chain yanks up the flapper and initiates the toilet’s flush. It will not be capable of yanking up the flapper should the toilet chain be too long. If the flapper doesn’t rise, the toilet doesn’t flush. When the flapper doesn’t close, the toilet never stops running. You can fix chain problems relatively easily by adjusting the chain’s length. Make sure you do not overextend the direction for the fix while making the adjustments after inspecting the chain and assess if it is too long or short.
Toilet Overflow Tube Cracked
Next to the refill tube inside the tank is the toilet’s overflow tube. Overflow tubes help empty water directly into the bowl during a flush. These tubes are not infallible, unfortunately. As the toilet’s constant pressing can easily crack damage as well can occur. If the tube does crack, water will run into it instead of past it. Replace the overflow tube to restore the performance.
It is still the most common though this is the most obvious. Only flush waste or toilet paper as this is critical. You will instantly create clogs when you treat your toilet like a garbage dumpster. When it won’t flush, the first thing you should do is try plunging a toilet. Make certain you are using a flange plunger since the cup will help you create a better seal in the toilet bowl. Should plunging prove to be ineffective consider investing in drain cleaning services. Where a plunger can’t, a professional can clear out a clog.